Rode Stereo VideoMic Pro – Camera Mounted Microphone

R4,890

The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design.

Ideal for Video & DSLR Cameras
Integrated Shoemount/Shockmount
Level Switch: -10dB / 0dB / +20dB
High-Pass Filter Switch: 75Hz
Durable Multi-Strand Cable
1/8″ (3.5mm) Output Connector
9V Battery Powered
The Rode Stereo VideoMic Pro builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic’s capsule feature a matched pair of 1/2″ cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone’s small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8″ (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

Broadcast recording quality on-camera microphone
Matched pair 1/2″ condenser capsules in XY stereo configuration
Ultra lightweight, compact form factor
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered – over 100 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output
Billeted metal camera shoe mount with 3/8″ thread for easy boompole mounting

In stock

Purchase this product now and earn 4890 Points!

SKU: RODSVMP Category:

Description

Transducer Pressure Gradient, JFET impedance converter Polar Pattern XY Cardioid (Coincident) Frequency Range 40Hz ~ 20,000Hz (selectable HPF@75Hz) Output Impedance 200Ω Maximum Output +4.2dBu (@ 1% THD into 1kΩ) Power Supply 9V alkaline battery Connection 1/8″ (3.5mm) stereo mini-jack SPL 134dB, max (1 kHz, 1% THD into 1kΩ) Sensitivity -38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz EIN 20dBA SPL (A – weighted per IEC651) Dynamic Range 100dB (per IEC651) Signal to Noise Ratio 73dB SPL (A – weighted per IEC651) Dimensions 66 x 108 x 130 mm Weight 117 g (without battery)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Close Menu
×
×

Cart